ultrakiev
New Member
- Joined
- Feb 25, 2021
- Messages
- 95
I bought a popular amazon/aliexpress battery indicator. It's a panel mounting unit. I noticed the front lip is so small, no tolerances for drilling, the hole should be exactly 2 1/8in . otherwise, there is could be an issue. So I designed the adapter plate to give more tolerance with the hole providing firm mounting and a bit of shade for easier readings outdoors ( in my case it's a portable power bank), it is also additional impact damage protection.
Just want to share my little project here that may be handy for someone with access to 3D printer.
Just want to share my little project here that may be handy for someone with access to 3D printer.
Attachments
Last edited: