Bluetti idea

[ATC_SolarAF]

I did what Bluetti says can't be done, I took apart one of my two AC200/P Bluetti's and tied them both into a Pro/Tran 2 tansfer box and then to my 150 Amp service panel. I have 750 watts(90 volts) separately going to each Bluetti; total of 1500 watts Solar panels on the roof. As of now, from Sun up/Sun down, I run my microwave (when needed), furnace, lights, ceiling fan, master bath, TV, DISH, kitchen Fridge, Garage, garage freezer off the system. What is great about the Bluetti's is the flow thru inverters that charge and displace at the same time. I know Bluetti is coming out with a better system for just this purpose but for the time being, I love what I have. I'll post pictures later as proof. If you have questions, let me know!

 

[Bob142]

Good tell, can’t wait for the show!

 

[pantechlife]

Would love to see what/how you've done here!

 

[Supervstech]

Sounds interesting

 

[macheung]

Did you tie the output of each 200p to each of the two 120V split phase rails? Why only 90V?