diy solar

diy solar

BMS/Inverter turns off after pushing 10A

Yeah, wtf is going on?

I'm assuming my crimps on the inline fuse might just be awful?

LOL as I was typing this, I just started wiggling one and it just came right out.

I might go to bunnings and buy a proper ratchet crimper. I will update you once I've connected it to a proper lug.

Further, the strands of the inline fuse cable appear to be silver which must mean aluminum? Would this make a difference? I don't know if I could fix this as I obviously can't remove the fuse.

Maybe I should buy a MIDI fuse as well?
 

Attachments

  • CB02DC56-9F49-4312-8013-2765F0DB1BFD.jpeg
    CB02DC56-9F49-4312-8013-2765F0DB1BFD.jpeg
    68.7 KB · Views: 2
Hey !! Just an update, I bought a new crimper and recrimped which didnt solve the issue- the problem was the nuts not being secured tight enough. I succesffuly used this pack last night while busking powering a valve amp!
Snoobler thanks so much for all you do on these forums
 

Attachments

  • E2B0A91C-5F09-4984-87F0-7A692ECFC8E4.jpeg
    E2B0A91C-5F09-4984-87F0-7A692ECFC8E4.jpeg
    238.9 KB · Views: 6
  • 9C6F55FE-0E6D-4953-BC43-BE128A8DF743.jpeg
    9C6F55FE-0E6D-4953-BC43-BE128A8DF743.jpeg
    182.1 KB · Views: 6
Hey !! Just an update, I bought a new crimper and recrimped which didnt solve the issue- the problem was the nuts not being secured tight enough. I succesffuly used this pack last night while busking powering a valve amp!
Snoobler thanks so much for all you do on these forums
Classic... this is so me. spend on expensive solutions then find a loose nut.
 
Back
Top