Bogart Engineering Controllers and Monitors

[frodo2222]

The TM-2030 is capable of managing two SC-2030 solar controllers, effectively doubling the solar current to 62 Amps. The TM-2030 can't manage other make/models of charge controllers and its serial port must not be connected to any controller other than the SC-2030. Doing so can (& very likely) damage the monitor and the controller.

OK ready to go BUT cannot tell what version I have from the numbers...any help? have both the TM and the controller and looked but the stickers have long numbers with no version..how do I tell the version from the numbers might have to enlarge to see well but hopefully you can tell the version ..hoping for at least 2.5 and 9

 

[jeffreezeyeti]

I have both the TM and the controller and looked but the stickers have long numbers with no version..how do I tell the version from the numbers might have to enlarge to see well but View attachment 17076any help is very welcomeView attachment 17075

You can see mine was clearly marked under the wire connection and the new version sticker is to the right after I sent it to Bogart.

 

[HarryN]

I was going to start a thread about the Bogart charge controller, monitor and WiFi module, but found this one in the search.

I have built a number of AGM and LiFe battery based 24 volt systems with these.

Very solid, US made product offering.

 

[scrubjaysnest]

I have the Bogart monitor on the MH, still going strong. But for the off grid nest I'm going with Victron Bluetooth. Much cheaper.