queenpictoria
New Member
- Joined
- Aug 27, 2021
- Messages
- 40
Hello,
In hooking my 12v 100a Lithium Ion Phosphate battery to my solar setup,
I have a question regarding the "Bolt-on fuse' that will be attached to my
positive battery cable, and attached AT THE BATTERY TERMINAL.
The bolt I am using is smaller than the hole on the fuse.
I will be purchasing a couple more battery bolts, but for now, I am
using a smaller bolt to attach the 175A Bolt-On Fuse to the end
of the positive cable, before attaching the positive cable to the
battery.
Question: Is there a problem using washers on the 175A Bolt-On Fuse
in order to cover the difference in surface area between the size of the bolt
and the ring connector on the end of the positive battery cable?
This is only a question regarding the attaching of the Bolt-On Fuse to the
end of the positive battery cable.
I do have the proper size of bolt/nuts to attach the battery cables to the
battery.
Thank you for your attention on this matter.
In hooking my 12v 100a Lithium Ion Phosphate battery to my solar setup,
I have a question regarding the "Bolt-on fuse' that will be attached to my
positive battery cable, and attached AT THE BATTERY TERMINAL.
The bolt I am using is smaller than the hole on the fuse.
I will be purchasing a couple more battery bolts, but for now, I am
using a smaller bolt to attach the 175A Bolt-On Fuse to the end
of the positive cable, before attaching the positive cable to the
battery.
Question: Is there a problem using washers on the 175A Bolt-On Fuse
in order to cover the difference in surface area between the size of the bolt
and the ring connector on the end of the positive battery cable?
This is only a question regarding the attaching of the Bolt-On Fuse to the
end of the positive battery cable.
I do have the proper size of bolt/nuts to attach the battery cables to the
battery.
Thank you for your attention on this matter.
Last edited: