Bus Bars for Paralleled cells

[brianjonesphoto]

I'm about to pull the trigger on 16 230AH cells to build a 2p8s 460AH 24v battery. At one point I saw a post about bus bars for parallel cell configurations and can't find it anymore. Is it worth getting "3 Hole" bus bars or should I just stack the included bars on the middle connection? I know it's less than ideal. Thanks.

 

[740GLE]

Many people complain the bus bars of the Eve 230ah are under sized for 200a loads.

Also I think you’d want to try 4 hole for various 2p8s configurations I’ve seen.

If you were to double stack them you’d need to cut off the heat shrink to let them lay flat

What loads are you looking to serve?

Try these, I think you want 55mm spacing.

https://m.aliexpress.com/item/1005003230279908.html?aff_fcid=3ca3aedb03704f06a47f2e5c6440c6fd-1650827720652-05594-_9h7aqI&tt=CPS_NORMAL&aff_fsk=_9h7aqI&aff_platform=portals-tool&sk=_9h7aqI&aff_trace_key=3ca3aedb03704f06a47f2e5c6440c6fd-1650827720652-05594-_9h7aqI&terminal_id=bbea4fbef810474680b61bc5e1d41386&afSmartRedirect=y