slipperysam
New Member
- Joined
- Feb 2, 2021
- Messages
- 22
This setup seems intuitive to me, but there are areas where my understanding is lacking (e.g. isolation?), so I want to verify my plan makes sense. I have a 24V battery bank and plan to run mostly 12V appliances, but some 24V as well. I'd like to have a single Lynx Distributor fuse going to a 24V distribution panel. From there, I'd like to have fused circuits running 24-12 stepdowns to their own 12V distribution panels. I've attempted (keyword!) to draw this and have it attached.
The drawing is horrible, so I'm also including an example:
Does this make sense? Or, is there some reason why the 24-12 converters would need to be wired directly back to the Lynx?
The drawing is horrible, so I'm also including an example:
Code:
Lynx fused at 100A
-> BlueSea fuse blade
-> 10A fuse to 24v fridge
-> 25A fuse to 24-12 50A output
-> BlueSea fuse blade
-> 10A fuse to 12v fan
-> 10A fuse to 12v fan
-> 5A fuse to 12v lights
-> 10A fuse to 24-12 20A output
-> BlueSea fuse blade
-> 15A fuse to 12v water pump
-> 5A fuse to 12v lights
Does this make sense? Or, is there some reason why the 24-12 converters would need to be wired directly back to the Lynx?