Adrianablett
New Member
- Joined
- Feb 27, 2021
- Messages
- 15
Hi
Just a quick one.
Just finished capacity test on my 150ah 4s 12v pack.
Charged to 3.65v, rested for over an hour before I did the capacity test.
These are my results off the bms, one cell seems quite a bit lower than the others.
My question is do the cell voltages look ok or do I need to be looking at the cell that hit 2.5v first.
I am happy with the capacity result, was just wondering about the cell voltage difference.
Thanks in advance guys
Just a quick one.
Just finished capacity test on my 150ah 4s 12v pack.
Charged to 3.65v, rested for over an hour before I did the capacity test.
These are my results off the bms, one cell seems quite a bit lower than the others.
My question is do the cell voltages look ok or do I need to be looking at the cell that hit 2.5v first.
I am happy with the capacity result, was just wondering about the cell voltage difference.
Thanks in advance guys