Chargeverter extension cord or replace oem cord?

[Zapper77]

I have a 25 foot 30 amp 10/4 cord that I no longer use. I'm thinking about cutting off the 4-20amp end and replacing it with L14-30R or should I replace the OEM cord on the chargeverter with the freshly cut 10/4 cord? I'm leaning towards replacing the short cord with approximately 20' of the yellow 10/4 but the extension cord would have more uses.

 

[sunshine_eggo]

Option 3:

Don't care. Whichever is easier/cheaper/faster/meets my needs best.

 

[sunshine_eggo]

...and dang you if you haven't forced me online looking for various 120/240V NEMA L14-30 twist lock extension cords, so I can actually get BOTH Quattros fed with 120V instead of only the L1 inverter. I guess it says a lot that I haven't had to run the generator for ~9 months...

 

[Zapper77]

...and dang you if you haven't forced me online looking for various 120/240V NEMA L14-30 twist lock extension cords, so I can actually get BOTH Quattros fed with 120V instead of only the L1 inverter. I guess it says a lot that I haven't had to run the generator for ~9 months...

Had to run mine today for monthly maintenance and it didn't hurt to add 3kWh to the batteries. 3 days of rain and clouds from a stalled low.

 

[sunshine_eggo]

let's just say that me and generator maintenance are not closely acquainted...