Connector Type of SMA Sunny Island

[YellowBuddy]

I purchased a set of used Sunny Islands to compliment my existing ones. The AC1 and AC2 connectors are different than the screw type of my current ones. Does anyone know how to release the wires from these? The previous owner cut the wires instead of pulling them out proper. They seem like stab in with a tab release but I don't want to go breaking one since I'm not 100% certain.

 

[Pyrofx]

Push screwdriver in the upper holes . It pops the lower clamp free

 

[YellowBuddy]

Push screwdriver in the upper holes . It pops the lower clamp free

Thanks for the confirmation. Just went and popped them all out. Screw driver goes up, slight pressure downwards and they slide right out.