diy solar

diy solar

CP3500 Connector how to make.

Ralphy4

New Member
Joined
Jan 22, 2023
Messages
1
Location
Greenville
Hello I'm new to the forum. I have two vtoman solar generator. And it came with one cp3500 connector to connect them together. My issue is the cable is to short. I would like to connect two of the cp3500 cables together can anyone help with that? I tried to extend it but it did not work. It had a com wire running thru the negative wire. I also have a car jumper cable that have male end for the cp3500 connector. But I don't have a strong enough soldering iron. Can you buy this connector already made? Help!
 

Attachments

  • 16743976469605092924927416896583.jpg
    16743976469605092924927416896583.jpg
    189.5 KB · Views: 17
  • 16743978837478904327056358395830.jpg
    16743978837478904327056358395830.jpg
    180.3 KB · Views: 16
I have the same problem as you. I think the CP3500 cable is pretty similar to the EC5 cable.
 
Last edited:
The cable is available at https://www.amazon.com/dp/B0B8WXFMMZ. I just received mine. Now to figure out what it can do. One review says: "You can buy the VTOMAN cable and connect this Nboost 1500 to another Nboost 1500. It’ll work but you’ll have to charge each individually. When these are powering something over 500 watts they split the wattage. Before connecting them turn them on first then connect the cable."
 
Back
Top