• Have you tried out dark mode?! Scroll to the bottom of any page to find a sun or moon icon to turn dark mode on or off!

diy solar

diy solar

Daly BMS+ Victron, reduce current with increase in soc

Tailele

New Member
Joined
Dec 3, 2020
Messages
19
Good morning, I would like to know if any of you have had the opportunity to implement this functionality, or alternatively it already exists within the BMS but I personally haven't noticed. My idea is to reduce the charging current when the SOC of the battery reaches a certain value.
Currently my system consists of 4 lifepo batteries with 16 cells for each pack, controlled by a Victron system. The dialogue between the inverter and the cells works perfectly. but I haven't found any way to do what I have in mind.

Thanks
 
Lower the max charge function and you have lower soc.
Lower the float charge on a lower volts and and it kick later in float.
You can adjust the volts different between the float difrence and the bulks start .
So that the bulk start later.

Play with that and you can adjust it .
Its not optimal.
But what you like and think is to change on the fly a lower charge.
 

diy solar

diy solar
Back
Top