Hi friends, if any of you have had any experience mounting panels on corrugated tin roofs but NOT flat, I'd love to hear your thoughts.... I'm going bi (facials that is) and am putting them on a hot tin roof (I'm in AZ) but want some tilt for the bi factor... please feel free to join the discussion over on this link:
I'm probably going S-5's on the mounts but need some recommendations on the tilt part.... they don't even require rails but this may only be for standing seams, not corrugated... will call them next week but thought I'd check with my peeps here first to see if any of you have had experience.
Your input is very much welcome and always appreciated...
Jen
Bi-Facials, installation height matters just as much as the angle of the dangle
Maybe I'm an optimist, but it was interesting to see they were getting gains at only 7cm. With the prices we are seeing for the et solar 410w panels, I thinks it's still worth it for 5-10%. depends where you put them. Ground mount also has the disadvantage of dirt getting on the panels -...
diysolarforum.com
I'm probably going S-5's on the mounts but need some recommendations on the tilt part.... they don't even require rails but this may only be for standing seams, not corrugated... will call them next week but thought I'd check with my peeps here first to see if any of you have had experience.
Your input is very much welcome and always appreciated...
Jen
Last edited: