Firstascent
Solar Enthusiast
- Joined
- Mar 7, 2020
- Messages
- 265
For what it's worth, these are my dies from Rennsteig, note the different style between 10/12awg and the barrel style 8awg.
These dies alone will run you $150+ !
I'm not saying you have to spend that kind of money, but you do if you want approved components for MC4. This will at least give you an idea on the format.
When I'm spec'ing out tools, I always start with the best option as a baseline, then decide from there how I want to proceed. But I feel it's at least important to understand, then us individual users can decide what is "good enough".
These dies alone will run you $150+ !
I'm not saying you have to spend that kind of money, but you do if you want approved components for MC4. This will at least give you an idea on the format.
When I'm spec'ing out tools, I always start with the best option as a baseline, then decide from there how I want to proceed. But I feel it's at least important to understand, then us individual users can decide what is "good enough".