S sonny93 New Member Joined Dec 17, 2020 Messages 119 Aug 1, 2021 #1 Hey all, I'm connecting 8 lithium 3.2V 272aH cells in the below configuration. I am just double checking that this arrangement is accurate. Im just about to cut my own busbars so wanted to make sure this is accurate before connecting them together.
Hey all, I'm connecting 8 lithium 3.2V 272aH cells in the below configuration. I am just double checking that this arrangement is accurate. Im just about to cut my own busbars so wanted to make sure this is accurate before connecting them together.
Philtao Sailor, EE & Designer of the TAO BMS Joined Jun 10, 2021 Messages 43 Location Australia Aug 2, 2021 #2 1st drawing: to have same resistance path for all cells the connector between positive #2 and negative #3 should be at the bottom.
1st drawing: to have same resistance path for all cells the connector between positive #2 and negative #3 should be at the bottom.