AS 3731, Stationary batteries (series)
AS 62040.1.1, Uninterruptible power systems (UPS), Part 1.1: General and safety requirements for UPS used in operator access areas
AS 62040.1.2, Uninterruptible power systems (UPS), Part 1.2: General and safety requirements for UPS used in restricted access locations
AS/NZS 1170.1, Structural design actions, Part 1: Permanent, imposed and other actions AS/NZS 1170.2, Structural design actions, Part 2: Wind actions
AS 1170.4, Structural design actions, Part 4: Earthquake actions in Australia
AS/NZS 1680.1, Interior and workplace lighting, Part 1: General principles and recommendations AS/NZS 3000, Electrical installations (known as the Australian/New Zealand Wiring Rules)
AS/NZS 3008.1.1, Electrical installations — Selection of cables, Part 1.1: Cables for alternating voltages up to and including 0.6/1 kV — Typical Australian installation conditions
AS/NZS 3008.1.2, Electrical installations — Selection of cables, Part 1.2: Cables for alternating voltages up to and including 0.6/1 kV — Typical New Zealand conditions
AS/NZS 4029.1, Stationary batteries — Lead-acid, Part 1: Vented type
AS/NZS 4029.2, Stationary batteries — Lead acid, Part 2: Valve regulated type
AS/NZS 4509.1, Stand alone power systems, Part 1: Safety and installation
AS/NZS 4777.1, Grid connection of energy systems via inverters, Part 1: Installation requirements
AS/NZS 4777.2, Grid connection of energy systems via inverters, Part 2: Inverter requirements
AS/NZS 5000.1, Electric cables — Polymeric insulated, Part 1: For working voltages up to and including 0.6/1 (1.2) kV
AS/NZS 5000.2, Electric cables — Polymeric insulated, Part 2: For working voltages up to and including 450/750 V
AS/NZS 5033, Installation and safety requirements for photovoltaic (PV) arrays
AS/NZS 60898.2, Circuit-breakers for overcurrent protection for household and similar installations, Part
2: Circuit-breakers for a.c. and d.c. operation (IEC 60898 2 Ed. 1.1 (2003) MOD) AS/NZS IEC 60947.1, Low-voltage switchgear and control gear, Part 1: General rules
AS 60947.3, Low-voltage switchgear and control gear, Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units (IEC 60947 3:2015 (ED.3.2) MOD)
NZS 4219, Seismic performance of engineering systems in buildings IEC 60269-1, Low-voltage fuses, Part 1: General requirements
IEC 60269-3, Low-voltage fuses, Part 3: Supplementary requirements for uses for use by unskilled persons (fuses mainly for household or similar applications) — Examples of standardized systems of fuses A to F
IEC 60529, Degrees of protection provided by enclosures (IP Code)
IEC 60896, Stationary lead-acid batteries (series)
AS/NZS IEC 60947-2, Low-voltage switchgear and control gear, Part 2: Circuit-breakers
IEC 62109-1, Safety of power converters for use in photovoltaic power systems, Part 1: General requirements
IEC 62619, Secondary cells and batteries containing alkaline or other non-acid electrolytes — Safety requirements for secondary lithium cells and batteries, for use in industrial applications
IEC 62930, Electric cable for photovoltaic systems with a voltage rating of 1,5 kV DC
Best Practice Guide: battery storage equipment — Electrical Safety Requirements V 1.0 (2018)1)