trougnouf
New Member
- Joined
- Aug 15, 2021
- Messages
- 38
In order to make holes through a Flexibar (to be used as busbars between battery cells), the manufacturer recommends using a hole puncher such as their MFPT.
The problem is that their least expensive piece of equipment, the MFPT, costs € 1260.73 and that is a lot for something I will seldom use.
Is that piece of equipment necessary, are there more versatile alternative that are not significantly more expensive, and most importantly are businesses that offer to make the holes or rent the equipment common?
The problem is that their least expensive piece of equipment, the MFPT, costs € 1260.73 and that is a lot for something I will seldom use.
Is that piece of equipment necessary, are there more versatile alternative that are not significantly more expensive, and most importantly are businesses that offer to make the holes or rent the equipment common?