NagasinLake
New Member
- Joined
- Jun 26, 2022
- Messages
- 2
Hi There Folks!
Here is my issue, I have tw0 Ecoflow Delta Pros, one is the expansion battery. I have it set up at my cottage and has been working flawlessly up until yesterday. The battery packs are completely separated from the camp meaning I have the power feed from the generator going to a sole 120v wall outlet into the camp where I charge the packs, like i said this has been working flawlessly for a couple months. When I now plug it in to charge on 120v it sparks the 120v outlet and trips the generator on overload. 120v power cord provided with the Delta pro is putting out voltage, 7-9 volts. Its also sending power back to the generator, i found that out the hard way by touching the three prongs early in the AM, no coffee needed lol!!
Everything else works, I'm charging the unit on solar at the moment and its providing us power.
I did contact Ecoflow also but no response yet
Any help would be appreciated!!
Here is my issue, I have tw0 Ecoflow Delta Pros, one is the expansion battery. I have it set up at my cottage and has been working flawlessly up until yesterday. The battery packs are completely separated from the camp meaning I have the power feed from the generator going to a sole 120v wall outlet into the camp where I charge the packs, like i said this has been working flawlessly for a couple months. When I now plug it in to charge on 120v it sparks the 120v outlet and trips the generator on overload. 120v power cord provided with the Delta pro is putting out voltage, 7-9 volts. Its also sending power back to the generator, i found that out the hard way by touching the three prongs early in the AM, no coffee needed lol!!
Everything else works, I'm charging the unit on solar at the moment and its providing us power.
I did contact Ecoflow also but no response yet
Any help would be appreciated!!