My old Inverter/charger gave out so replaced with a 24v outback. I reconfigured my 4 6V Surrettes ftom a 12v to 24v system and new Inverter/charger works fine. I then disconnected my solar panels and connected my MPPT controller to the new battery configuration. It reads that voltage is now 25.8 but obviously has alarms on it as it is configured for a 12v system.
However, i am struggling to change paramaters to 24V settings. No matter what I do I get "para error" and wont allow me to increase all the various voltage settings ( manual says to double the 12v ones ).
I have tried changing from "flooded" to "user" and it still wont allow me to change the 12 battery settings ?? what am i missing ?
thx
However, i am struggling to change paramaters to 24V settings. No matter what I do I get "para error" and wont allow me to increase all the various voltage settings ( manual says to double the 12v ones ).
I have tried changing from "flooded" to "user" and it still wont allow me to change the 12 battery settings ?? what am i missing ?
thx