Trying to get my head around the contoler settings on epever tracer 4210an have done alot of reading just want to make sure Im on the right path..?
My system.
2x 200w pv
Diy 4s eve 280ah lifepo4 (new)
Daly 100a bms.
Epever tracer 4210an 40amp.
Communication ebox bluetooth
Ive built the battery and am replacing AGMs.
Would just like to confirm the settings Im planning on using so I dont blow anything up
Planning on 90% 》 20% soc if thats the correct terminology
Android app settings:
First numbers are what the epever have as default lifepo4 settings bold numbers are my planned changes..
Boost duration... 120 is this OK?
Equalise duration... 120 change to 0
Temp compensation ...0
Over volt disconect V ...15.6v change to 14.7v
Over volt reconnect V ....14.6v change to 13.7v
Equalise charging voltage V...14.5v change to 0v
Boost charging V... 14.5v
Float charging V...13.8v
Boost re connect charge V...13.2v
Charging limit voltage V...14.6v ..change to 13.4v
Discharge limit voltage V...10.6v..change to 11.6v
Low voltage disconnect V ...11.1v change to 11.6v
Low voltage reconnect V...12.8v
Under voltage warning V...12v
Under voltage reconnect V... 12.8v
Low temp charge limit degC... -35 change to 5
Low temp discharge limit deg C...-35 change to 5
Any feed back greatly appreciated. Thanks
My system.
2x 200w pv
Diy 4s eve 280ah lifepo4 (new)
Daly 100a bms.
Epever tracer 4210an 40amp.
Communication ebox bluetooth
Ive built the battery and am replacing AGMs.
Would just like to confirm the settings Im planning on using so I dont blow anything up
Planning on 90% 》 20% soc if thats the correct terminology
Android app settings:
First numbers are what the epever have as default lifepo4 settings bold numbers are my planned changes..
Boost duration... 120 is this OK?
Equalise duration... 120 change to 0
Temp compensation ...0
Over volt disconect V ...15.6v change to 14.7v
Over volt reconnect V ....14.6v change to 13.7v
Equalise charging voltage V...14.5v change to 0v
Boost charging V... 14.5v
Float charging V...13.8v
Boost re connect charge V...13.2v
Charging limit voltage V...14.6v ..change to 13.4v
Discharge limit voltage V...10.6v..change to 11.6v
Low voltage disconnect V ...11.1v change to 11.6v
Low voltage reconnect V...12.8v
Under voltage warning V...12v
Under voltage reconnect V... 12.8v
Low temp charge limit degC... -35 change to 5
Low temp discharge limit deg C...-35 change to 5
Any feed back greatly appreciated. Thanks