EPever Xtra

[ramiws]

I see that most posts talk about tracer and I have got xtra model. It says in the manual that Lifepo4 is supported when you select Sealed as I understood. Here is attached snapshot of the manual.

Here is link to the manual:

https://www.epsolarpv.com/upload/file/1811/XTRA-SMS-EL-V1.3.pdf

Anybody else got this model ? How does it know how to switch to Lifepo4 settings, how can I verify that? Does it only check battery voltage to decide that battery is full?

 

[snoobler]

It doesn't. It's indicating the Sealed acid program is also suitable for LFP. With the exception of the float voltage, it's fine. Float voltage at 13.8V is too high. Should be no higher than 13.6V.

Best to use USER and program your own parameters.