First battery build, problems with BMS

[Myrrdin]

Update 3:

Today new balancing wires with correct JST arrived. I will now build the battery since the cells has completed Top balancing.

I am trying to find a manual for the BMS (Daly LiFePO4 4S 12V 150A (R05U-GB08)) with no success.

Can anyone help me with correct setup for the BMS? I sadly don’t know how to activate it…

 

[Just John]

Update 3:

Today new balancing wires with correct JST arrived. I will now build the battery since the cells has completed Top balancing.

I am trying to find a manual for the BMS (Daly LiFePO4 4S 12V 150A (R05U-GB08)) with no success.

Can anyone help me with correct setup for the BMS? I sadly don’t know how to activate it…

Good luck finding a manual. Daly gives a connection diagram and that's about it. The resources section of the board contains a lot of info.
If you have the new bluetooth module with a black dot at the end of the word bluetooth, try that to activate.

 

[Myrrdin]

Good luck finding a manual. Daly gives a connection diagram and that's about it. The resources section of the board contains a lot of info.
If you have the new bluetooth module with a black dot at the end of the word bluetooth, try that to activate.

I got this one, no dot…

 

[Myrrdin]

Damn, I can not activate the BMS…

 

[Just John]

Damn, I can not activate the BMS…

If there is a 2 pin connector labeled "key" you can short those pins.
Charging should also activate it (at least a couple of amps, battery positive to P-)

 

[Myrrdin]

Thanks for helping me solve this problem.
I can not find any connectors labeled Key.

There is 2 pins beside ”monitor” ?

 

[Just John]

Thanks for helping me solve this problem.
I can not find any connectors labeled Key.

There is 2 pins beside ”monitor” ?

That might be it, it is on the opposite side of the monitor connection on mine, but they changed the design at least 3 times in the past year.