Just finished my first battery build for a narrow compartment in my TAB 320 teardrop trailer. I used soft neoprene from McMaster between the cells and galco grounding straps in place of solid bus bars to eliminate any possible terminal stress. It’s made with 272ah cells and an overkill BMS. Mounting brackets from overkill would have saved me a bunch of time trying to figure out how to mount it! BTW, I’m not running a inverter, just 12v fridge, fan, lights and a 12v circulating pump for heat this winter.
I was a bit disappointed with the iPhone app after seeing the slick Android graphics in Will’s video. I downloaded the BMS parameters and only changed the two capacity parameters. I think that’s all I need to do, right?
I really appreciate all of the information on this forum and the helpful comments on some of my earlier posts. I became a member last December and have certainly learned a lot!
I was a bit disappointed with the iPhone app after seeing the slick Android graphics in Will’s video. I downloaded the BMS parameters and only changed the two capacity parameters. I think that’s all I need to do, right?
I really appreciate all of the information on this forum and the helpful comments on some of my earlier posts. I became a member last December and have certainly learned a lot!