I bought these busbars to make a 12v system from my 16 mismatched cells from aliexpress.
I balanced them into groups of 4 that all had the same AH total, and put them in parallel, just with homemade busbars. I bought these to allow me to pull more amps than the thin angle aluminum I used to balance the cells.
The idea was to have each "pack" have one of these busbars on the positive and negative lines, and connect with the 1-1 bars that came with the batteries.
But I recently moved, and some of the batteries were actually damaged while I was moving, and I think I would prefer to build up a 48v system.
These have 4 holes spaced 50mm on-center with quite a bit of wiggle room for things +- 2 inches.
I paid $90 for these 8, and I'd like to get $80 and I would cover shipping to the continental US, or 70 if you want to cover shipping.
If someone wants some mildly damaged cells in the Orlando area, reach out to me too. I may put a post about them, but I will want to capacity test them again whih I haven't done to see which ones are still "good"
I balanced them into groups of 4 that all had the same AH total, and put them in parallel, just with homemade busbars. I bought these to allow me to pull more amps than the thin angle aluminum I used to balance the cells.
The idea was to have each "pack" have one of these busbars on the positive and negative lines, and connect with the 1-1 bars that came with the batteries.
But I recently moved, and some of the batteries were actually damaged while I was moving, and I think I would prefer to build up a 48v system.
These have 4 holes spaced 50mm on-center with quite a bit of wiggle room for things +- 2 inches.
I paid $90 for these 8, and I'd like to get $80 and I would cover shipping to the continental US, or 70 if you want to cover shipping.
If someone wants some mildly damaged cells in the Orlando area, reach out to me too. I may put a post about them, but I will want to capacity test them again whih I haven't done to see which ones are still "good"