diy solar

diy solar

Giandel inverter beeping and fan stays on

Capnkirk

New Member
Joined
Jun 22, 2021
Messages
1
Hey guys,
I’m having issues with my Giandel 2200w pure sine wave inverter. It worked fine until one day the fan stayed on after pulling 1300w, and now it’ll read LO and turn off, despite the battery bank reading at 12.7v.

Set up:
Four 100w panels parallel connected > 10awg cables > Rich’s 40 MPPT controller > 10awg cables > four 100ah 12.8v lithium batteries connected with #2 gauge cables > Giandel 2200w pure sine wave inverter

Since the batteries aren’t depleted, I’m assuming this inverter is busted.
I’d appreciate any insight you all could give me!
 

Attachments

  • 46C7863A-ECC3-4EEA-BE8B-67AA34638C10.jpeg
    46C7863A-ECC3-4EEA-BE8B-67AA34638C10.jpeg
    130.8 KB · Views: 6
  • BEA33C92-51B9-4F96-A864-6F467BA9D478.jpeg
    BEA33C92-51B9-4F96-A864-6F467BA9D478.jpeg
    226.5 KB · Views: 6
  • 84F770AD-10FB-4712-A0E9-BEB2CA57056D.jpeg
    84F770AD-10FB-4712-A0E9-BEB2CA57056D.jpeg
    274.3 KB · Views: 6
Welcome to the forum.

Without knowing anything specific about that model, it sure sounds like the inverter has failed.
 
Back
Top