Grid-connected EG4 6000XP with Reliance transfer switch how to's or videos?

[Tkmlinus]

Greetings everyone!
After months of searching, I have to break down and ask. Are there any tutorials or how to's for putting together a grid connected(not grid tied) EG4 6000XP with solar panels and batteries which is feeding a Reliance 6 or 10 circuit transfer switch to run a few critical loads even if the grid is down? Reading through the forum it seems to be a fairly common set up, yet it feels that I can only find information on various pieces of this type of setup, but nothing on the whole thing. Maybe I am over complicating things but I want to do things right. Thanks in advance!

 

[FilterGuy]

Notice that the 6000XP is a common neutral architecture. Consequently, the neutral does not need to go through the transfer switch.

 

[FilterGuy]

Note that the same wiring applies for Arc Fault/Ground Fault Circuit Interruption Breakers

 

[Tkmlinus]

View attachment 288056

Notice that the 6000XP is a common neutral architecture. Consequently, the neutral does not need to go through the transfer switch.

Thanks!!! This is just what I needed