Growatt 3000TL LVM 48v - Parallel Single Phase?

[billduck]

How does one get to this menu? Is it just specifyinh PAL, then these options occur?

I am not sure I have the parallel boards. but I do have the DB9's and current sharing cables.
What I was asking, before I hook 2 each of a SPF 5000 ES-US, is how do you get to the menu designating one inverter as master and one as slave. Does this optopn appear after you choose PAL on one or both of the inverters. Mopat, can I communicate with you privately?

 

[mopat]

As I indicated in Post #5, Master and slave units are randomly defined (pg 36 on manual).



This thread WAS about Growatt 3000TL LVM 48 volt.

Are you in USA?

 

[billduck]

I have that board. And I see now that I am using the SPF 5000 ES-US. And I see the image in the manual. Duh!
I am in Houston, Tx. And am implementing a 5000 watt unit parallel setup for a friend on a 40' container.
Also a 3000 watt unit, but the former takes priority. I would be happy to share plans for the panel mounting on the container. Outboard panels are tracking.