Camhancock
New Member
- Joined
- Aug 4, 2022
- Messages
- 2
I am running a growatt 6k inverter. I noticed when paying attention to my "load consumption power" and "load percentage" on both my growatt app and the inverter it self that the inverter will not actually run more then 3000 watts.
When I'm pulling 1500 watts my load percentage is at 50%
If I try and run more then 3000 watts my inverter goes over 100% load and shuts down. I do understand that some appliances have a large start up draw so I tested my theory using heat lamps. Wattage is instant and constant. If I try and go over 3000 watts the inverter still shuts down.
Anyone else notice this?
When I'm pulling 1500 watts my load percentage is at 50%
If I try and run more then 3000 watts my inverter goes over 100% load and shuts down. I do understand that some appliances have a large start up draw so I tested my theory using heat lamps. Wattage is instant and constant. If I try and go over 3000 watts the inverter still shuts down.
Anyone else notice this?