HI All,
Trying to work out the Protocol required to get my batteries talking to my Growatt SPH5000 Inverter, I have found that the Pylontech US2000-3000 are compatible & am assuming it is CAN BUS that is the protocol (I have got the protocol doc).
Does anyone have the Pinout for the RJ45 on the Inverter, protocol doc, Baud Rate & any info on what I need to pass to the inverter to get it working.
I have 4 x Li-ION & Lifepo4 packs with DALY BMS's but am looking to use the DIYBMS4.0 to manage the batteries, I would like to aggregate the totals of the batts & pass that to the inverter, looking to use a ESP & CANBUS module to do this.
Any info or help would be appreciated .
Thanks
Matt
Trying to work out the Protocol required to get my batteries talking to my Growatt SPH5000 Inverter, I have found that the Pylontech US2000-3000 are compatible & am assuming it is CAN BUS that is the protocol (I have got the protocol doc).
Does anyone have the Pinout for the RJ45 on the Inverter, protocol doc, Baud Rate & any info on what I need to pass to the inverter to get it working.
I have 4 x Li-ION & Lifepo4 packs with DALY BMS's but am looking to use the DIYBMS4.0 to manage the batteries, I would like to aggregate the totals of the batts & pass that to the inverter, looking to use a ESP & CANBUS module to do this.
Any info or help would be appreciated .
Thanks
Matt