Hi All,
I’m about ready to pull the trigger on purchasing an Ecoflow Delta Pro with four 335W solar panels. I have a 4000W gas generator for backup. I have an off-grid cabin, three-season use, with the interior unfinished at this point. I was going to wire 120V outlets, lights and switches to a small electrical box.
I’ll run the solar panel cables into the cabin to the Delta Pro. I’m not sure how to send power from the gas generator to the A/C connection on the Delta Pro. I have 50’ 30A power cord for the generator.
Also, I can’t figure out how to connect the 30 amp or 20 amp sockets on the Delta Pro to the electrical panel. I looked at manual transfer switches but they’re for a grid-tied system to switch to backup generator. Any suggestion will be appreciated, I would prefer not running extension cords from the Delta Pro.
Thanks!
I’m about ready to pull the trigger on purchasing an Ecoflow Delta Pro with four 335W solar panels. I have a 4000W gas generator for backup. I have an off-grid cabin, three-season use, with the interior unfinished at this point. I was going to wire 120V outlets, lights and switches to a small electrical box.
I’ll run the solar panel cables into the cabin to the Delta Pro. I’m not sure how to send power from the gas generator to the A/C connection on the Delta Pro. I have 50’ 30A power cord for the generator.
Also, I can’t figure out how to connect the 30 amp or 20 amp sockets on the Delta Pro to the electrical panel. I looked at manual transfer switches but they’re for a grid-tied system to switch to backup generator. Any suggestion will be appreciated, I would prefer not running extension cords from the Delta Pro.
Thanks!