RL419
New Member
- Joined
- Apr 8, 2022
- Messages
- 6
Hi, I finally received my EG4 6500 inverter today. I will be connecting it to the panel below which is in the prefab shed on my property. The manufacturer did this wiring and I need the communities help to understand next steps.
I have 3 more 20 amp breakers that I want to add to the open side but I am confused by the ground-neutral bar and what I need to do here. Will I connect the inverter AC output to the 2 lugs on the right and my ground rod to the neutral-ground lug/bar? In this case would I run the neutral and ground lines all the way from the right to the bar on the left? Thanks so much in advance!
I have 3 more 20 amp breakers that I want to add to the open side but I am confused by the ground-neutral bar and what I need to do here. Will I connect the inverter AC output to the 2 lugs on the right and my ground rod to the neutral-ground lug/bar? In this case would I run the neutral and ground lines all the way from the right to the bar on the left? Thanks so much in advance!
Last edited: