Kcdaniels
New Member
- Joined
- Sep 22, 2019
- Messages
- 263
Well with a lot of research and lots of help from people on this forum I have started my solar install...
That first hole in the roof was the hardest..?
Today was mounting unistrut cut 4 sections to 42" ...then mark out locations for the radius of my roof...
I drilled the holes for "well nuts" then cut 4 sections of 3M tape for each of the 4 holes per strut....
Laid the struts down on the 3M tape....filled the holes with Dicor ....install well nuts in holes then add more Dicor ...
Bed washers in the Dicor.. screw down and add more Dicor...lol....
Attach the "adjustable clamps to panel and call it done with the exception of attaching a safety line to the panel...
All of this in about 93 degrees ...?
Tomorrow I'll start the wiring ....here are some pictures.... Thanks guys !
That first hole in the roof was the hardest..?
Today was mounting unistrut cut 4 sections to 42" ...then mark out locations for the radius of my roof...
I drilled the holes for "well nuts" then cut 4 sections of 3M tape for each of the 4 holes per strut....
Laid the struts down on the 3M tape....filled the holes with Dicor ....install well nuts in holes then add more Dicor ...
Bed washers in the Dicor.. screw down and add more Dicor...lol....
Attach the "adjustable clamps to panel and call it done with the exception of attaching a safety line to the panel...
All of this in about 93 degrees ...?
Tomorrow I'll start the wiring ....here are some pictures.... Thanks guys !