Nabil Gebrael
New Member
A challenge to the smart ones.
Is there a way to share the DC power output of an installation of many PV panels (i.e. 100,000 watts), between 2 inverters or more. I prefer not to split the panels into 2 arrays one for each.
My need:
- One load requires a 3 phase inverter (30kw). This 3phase load is not running all the time, it runs few minutes during each hour, and
- the other major load requires a single phase inverter. This 1 phase load is running most of the time.
the question is how to connect both inverters to the same PV installation, so that the 1 phase load can benefit from all panels when the 3 phase is not needing it.
I welcome any questions or idea. If interested i can go into the detail of the installation and how it solve big problems for me.
Thanks,
Nabil
24 April 2022
Is there a way to share the DC power output of an installation of many PV panels (i.e. 100,000 watts), between 2 inverters or more. I prefer not to split the panels into 2 arrays one for each.
My need:
- One load requires a 3 phase inverter (30kw). This 3phase load is not running all the time, it runs few minutes during each hour, and
- the other major load requires a single phase inverter. This 1 phase load is running most of the time.
the question is how to connect both inverters to the same PV installation, so that the 1 phase load can benefit from all panels when the 3 phase is not needing it.
I welcome any questions or idea. If interested i can go into the detail of the installation and how it solve big problems for me.
Thanks,
Nabil
24 April 2022