Issues with Qcell 7.6 Q.Home ESS HYB G1 (SolaX Hybrid Rebrand) Programming help

[Techx1979]

Hey everyone! I recently purchased a Qcell 7.6 Q.Home ESS HYB G1 inverter, which is essentially a rebranded SolaX hybrid inverter. I’m still waiting for my solar panels to be installed on the roof, but I’ve already managed to charge the batteries using the inverter. However, I’m having trouble with a couple of key features and would love some advice from anyone familiar with this setup!
My main goal is to charge the battery in a daytime right now. I’m using grid to charge and use it at night time.
If someone out there is expert, I’m willing to pay for consulting
Issues I’m Facing:

1. Time-of-Use Activation: I can’t seem to activate the time-of-use function. Any tips on how to get this working?
2. Parallel Connection: I’m unable to connect the inverter in parallel mode—there seems to be no option other than using an ethernet plug.

If anyone has experience with this inverter and can provide some guidance, I’d be happy to compensate for your time. I’ve attached a few pictures for reference so you can see the system setup.

Attached bunch of pictures just for references

 

[steelandfeels]

Hello. I have 1 of these systems, thinking about scaling to two.

I have several communications with Q Cell Support. This support ticket was escalated twice.

The sequence of responses were:

"No they do not have no parallel compatibility"
"What about this parallel port?"
"Oh yes, they do have parallel compatibility."
Then a US based Engineer chimes in...
"Just to reiterate confirmation, the Q HOME HYB-G1 is not approved for parallel configurations. Originally the hardware was intended for this purpose, but that functionality was never released or approved during the products life cycle. Apologies for the confusion."

If you have attempted to connect in parallel and have any feedback, id love to hear back from you.

 

[ssts]

Hey everyone! I recently purchased a Qcell 7.6 Q.Home ESS HYB G1 inverter, which is essentially a rebranded SolaX hybrid inverter. I’m still waiting for my solar panels to be installed on the roof, but I’ve already managed to charge the batteries using the inverter. However, I’m having trouble with a couple of key features and would love some advice from anyone familiar with this setup!
My main goal is to charge the battery in a daytime right now. I’m using grid to charge and use it at night time.
If someone out there is expert, I’m willing to pay for consulting
Issues I’m Facing:

1. Time-of-Use Activation: I can’t seem to activate the time-of-use function. Any tips on how to get this working?
2. Parallel Connection: I’m unable to connect the inverter in parallel mode—there seems to be no option other than using an ethernet plug.

If anyone has experience with this inverter and can provide some guidance, I’d be happy to compensate for your time. I’ve attached a few pictures for reference so you can see the system setup.

Attached bunch of pictures just for references

Hello, did you end up resolving the parallel connection issue?