LFP addict
New Member
This is the third BMS wich only show 0% SOC. All :JDB SP04S034-200A
When i use the admin app to configure settings, i can change :Cell 100% Cap. Voltage to another value and right SOC % shows again.
After a while it jumps to 0 % again.
On my first encounter I discovvered when unconnecting a positive lead resulted in 0% SOC @ 13,4v with a 4S pack. Changing a value in the 100 -or 80% value did bring the right SOC back. This not always works. Could it be a faulty connection in the leads ? Must be others with this problem... (on a JDB)
When i use the admin app to configure settings, i can change :Cell 100% Cap. Voltage to another value and right SOC % shows again.
After a while it jumps to 0 % again.
On my first encounter I discovvered when unconnecting a positive lead resulted in 0% SOC @ 13,4v with a 4S pack. Changing a value in the 100 -or 80% value did bring the right SOC back. This not always works. Could it be a faulty connection in the leads ? Must be others with this problem... (on a JDB)
