• Have you tried out dark mode?! Scroll to the bottom of any page to find a sun or moon icon to turn dark mode on or off!

diy solar

diy solar

JK InverterBMS Panel Drawing

intermez

New Member
Joined
Aug 21, 2021
Messages
5
Has anyone obtained a drawing (with dimensions) for the comm/interface board for the JKInverter BMS? I'm talking about the board
that's about 6" x 2"with the 5 RJ45 connectors, status lights, DIP switch,..... that connects to the Inverter BMS with three cables.

I'd like to make a small panel to mount the board nicely. If I can do it will make it available to others unless someone
else has already done it. Don't need to spend $'s for a whole front panel for a battery box and cut it up for just to get
a mounting for the comm board. Any thoughts appreciated.

intermez
 
I've got one I modified for a 3d printer. Is that what you were looking for?

1723492420801.jpeg


I ended up having them laser cut and I liked them better.

1723492457719.jpeg

I realized that I had the label for the Charge a little incorrect. The last LED is for connection.
 
Yes, this is exactly what I'm looking for. Any chance you would sell the ones that aren't 100% correct or perhaps you could make new ones
to sell? I need five in total but I'll take whatever you don't need. Haven't tried 3D printing at this point but will if necessary.

Thanks, Kevin, intermez
 
Hi, could you send me the files? I've been looking for them in dxf for a while, thanks.
 
I've got one I modified for a 3d printer. Is that what you were looking for?

View attachment 236058


I ended up having them laser cut and I liked them better.

View attachment 236059

I realized that I had the label for the Charge a little incorrect. The last LED is for connection.


Wow!
This is exactly what I've been looking for for weeks!

Please, please, please send me a copy of those CAD files via DM, or better yet, post them on Thingiverse!
 
I've got one I modified for a 3d printer. Is that what you were looking for?

View attachment 236058


I ended up having them laser cut and I liked them better.

View attachment 236059

I realized that I had the label for the Charge a little incorrect. The last LED is for connection.

Hi @TechRider, Great job, I am also building a DIY battery using the JK Inverter BMS. would you mind sharing the cad drawing with dimensions used for the laser cutting. Thanks in advance , Dimis
 
Last edited:
Be careful. I found several stp and dxf files from web and no two perfectly match alignment.

I did manage to find one that was fairly close.
 

diy solar

diy solar
Back
Top