dgd4040
New Member
I am waiting for my bench power supply to arrive. I want to power up the BMS and check out the Bluetooth interface and all the setting.
The batteries range from 3.222V to 3.314V. I don't foresee any problem connecting the batteries in series as a 24V pack and connecting the BMS to become familiar with it? I am not going to charge or discharge the pack.
Anything I am missing? the batteries should be fine in series
Thanks
The batteries range from 3.222V to 3.314V. I don't foresee any problem connecting the batteries in series as a 24V pack and connecting the BMS to become familiar with it? I am not going to charge or discharge the pack.
Anything I am missing? the batteries should be fine in series
Thanks