Lifepo4 BMS compatibility with LTO

[Engineer DIY]

Hello all, generally if a LIFEPO4 BMS has an option for configuring cell voltage levels to whatever even in the range of LTO cell 1.9V - 2.8V.
Then is it suffice to say that the BMS is compatible with LTO cells? Basically I came across a Lifepo4 BMS from company called Seplos and the general aesthetics of the BMS are well suited to fit in our existing telecom battery pack, so I am trying to understand if I can use the same BMS for LTO cells as I haven't found LTO BMS with the same shape and appearance. The company said it's compatible with Lifepo4 and the cell voltages are customisable.

24/48V 8S/16S 150A lithium iron phosphate lifepo4 bms monitoring system battery management system with LCD Screen

High quality 24/48V 8S/16S 150A lithium iron phosphate lifepo4 bms monitoring system battery management system with LCD Screen from China, China's leading Seplos Smart BMS product market, With strict quality control Seplos Smart BMS factories, Producing high quality 24/48V 8S/16S 150A lithium...

www.seplos.com

 

[Odjono]

You really don't need a bms but the only one I know designed for round yinlong lto is this but you have to have them made

DIYBMS for Lithium titanate battery cells (LTO)

Disc shaped design of PCB not in Github. Isn’t it ?

community.openenergymonitor.org

 

[laraku]

JK BMS works well. I use them on my 3p12s packs of Toshiba LTOs.

 

[Odjono]

 

[Odjono]

JK BMS works well. I use them on my 3p12s packs of Toshiba LTOs.

I was looking up jk bms specs it olny lists 20s to 24s for their bms but a broader range on there active balancer
But I did look them up on ebay and found what your talking about