Line 1 and Line 2 Grid Emulation with Enphase Micro Inverter

[Danny]

Could I hook 2 Modified sign wave inverters to Line 1 and Line 2 after disconnecting the grid with enphase iq 7+ inverters if I was willing to dump load using a heater. Or do you all know a simple way to phase sift to dump production. I know the enphase inverters need to be regulated when my battery / loads are not taking all the production. I was thinking about using moving blankets to kill production. I'm just thinking about a Armageddon plan B. The only plan B i have now is to bypass the enphase inverters and route the DC to inverter / chargers to run my refrigeration. I have 7 x 385w on the roof. Time is running out to order anything do do the DC coupling but I do have 2 x 1500 watt inveters. I have no 220 loads.

 

[kernel]

No. Plus the enphase inverters are line to line no neutral. The modified wave will not be accepted as grid amd the modified wave inverters could likely never sync to anything much less each other.

A good hybrid inverter will do it.

 

[Will Prowse]

I was wondering about the enphase output. Good to know. Thanks Kernel