diy solar

diy solar

Looking for a install check. Replacing converter with Victron multiplus.

chaostactics

New Member
Joined
Jan 28, 2023
Messages
32
Location
Maryland
I'm at the final stages of bringing my victron multiplus online.

Just looking for clarification.

Victron AC out goes to my main distro panel where my shore power in was? (30 Amp main breaker.)20230204_111642.jpg20230129_151551.jpg

The shore power now goes to the Victron AC in?

The DC out from the Victron originating at the Lynx distributor goes to DC panel where the battery was connected? (The converter will be unhooked from the DC panel).
 
You have both AC and DC correct.

I added a Victron Battery Protect between the common bus bar and the main distribution panel. Just in case something on the DC side of the camper decides to draw down the battery unexpectedly. It's also an easy way to completely disconnect the DC side. I took the existing DC disconnect switch out of the circuit. It was an odd route that the wires took to use the disconnect switch and I shorted the path quite a bit.
 
Back
Top