chadhouser
New Member
- Joined
- Nov 13, 2019
- Messages
- 12
I have it connected to 2x 24v Battleborn 50Ah Lifepo4 batteries in series. As well as a 53Ah custom 14s Li-cobalt pack. I seem to have a bug with the float charging as I never see voltages higher then the float charge limit. The CV setting is 57.8 as recommended by Battleborn, but I have never seen voltage higher then the float setting currently bumped to 56v from 54V to get some sort of full charge. Also I am limited on breaker space in my electrical box. Can this split phase unit have only 120v input to one side. Ie L1 connected with no L2.
Last edited: