Broke down went the cheap route to start my setup before going all out with a all in 1 growatt and solar.
I got the ps1003 go wise 2000watt inverter going to use a 300 amp anl fuse ,1/0 welding wire rated for insane amps per foot , 20 amp 110 breaker on output .
I have got in my basket a 350 amp blue see cut off switch , post connection battery terminals with 1/0 x 2 connections making a simple plug and play, if I should be going with the 3/8 threaded let me know please.
I also have battery monitor capacity voltage led cost $8.
I have no low voltage cutoff from what I read the ps1003 has a 10.6v cutoff way to low for lead acid or anything for that matter.
How do I connect 1 up when I have a potential of pulling up to 300 amps??
I have looked can't find the high amp units I saw tons of 30 amp units.
any help is greatly appreciated I am trying to get everything installed in 5th wheel by the 15th for a trip to Carlsbad NM.
MM
I got the ps1003 go wise 2000watt inverter going to use a 300 amp anl fuse ,1/0 welding wire rated for insane amps per foot , 20 amp 110 breaker on output .
I have got in my basket a 350 amp blue see cut off switch , post connection battery terminals with 1/0 x 2 connections making a simple plug and play, if I should be going with the 3/8 threaded let me know please.
I also have battery monitor capacity voltage led cost $8.
I have no low voltage cutoff from what I read the ps1003 has a 10.6v cutoff way to low for lead acid or anything for that matter.
How do I connect 1 up when I have a potential of pulling up to 300 amps??
I have looked can't find the high amp units I saw tons of 30 amp units.
any help is greatly appreciated I am trying to get everything installed in 5th wheel by the 15th for a trip to Carlsbad NM.
MM