Jah-de-blah-0m
New Member
- Joined
- Jun 25, 2021
- Messages
- 23
I have an lv2424 with 10 12 volt 100 amp hour battleborn batteries. And 5 210 Watt newpowa panels. The mppt is 80 amps inverter 2000 Watt. Looking at the best way to create the array. The short circuit current on the panel is 13.09 and the operating current is 12.48 if wired in parallel with this trip the cutoff as the parallel would exceed the cutoff voltage but I think I'm missing something otherwise panels would not be in parallel so frequently. I don't think it would... Are we looking to create maximum amperage to charge batteries versus maximum voltage if hooked in series these panels produce 16.77 volts each 83.85 volts. If hooked in parallel we would produce 62.4 amps which does not exceed the mppt but might exceed the cutoff voltage of the panel. Are we looking for maximum voltage or amperage to charge batteries and are the cut off amperages stated on the back of the panel the cutoff which doesn't seem the case because people wouldn't be wiring these things in parallel so I'm a little confused.