Lynx distributor 4/0 lugs will not fit

[scoobie]

The Selterm lugs don't fit the neg terminal both 5/16 and 3/8. they hit the plastic mount for the flip covers.

The 3/8 barely misses the fuse because of the larger hole. The 5/16 hits the fuse.

Anyone know of a 4/0 lug that fits?

 

[HRTKD]

I don't use the Lynx device so I don't have any experience with my brand of lugs fitting that. The easy/quick solution is to grind down the tip of the lug so it doesn't hit the fuse. I wouldn't touch the side of the lug to make it fit better against the mount. Once the lug is crimped it might fit better against the mount.

 

[Ampster]

There are lugs that are angled or you can bend them in a video. It's easier after crimping because you have leverage and lug is narrower

 

[John Frum]

Explorist life seems to have a solution.

Victron Multiplus 3k-12V Wiring Kit

This wiring kit includes everything you need to connect a Victron Multiplus 3k 12V Inverter/Charger to a Victron Lynx Distributor. Victron Multiplus 3k-12V not included, but can be purchased here. Optional add-on VE.Bus Smart Dongle

shop.explorist.life

 

[MaikaiLifeDIY]

The Selterm lugs don't fit the neg terminal both 5/16 and 3/8. they hit the plastic mount for the flip covers.

The 3/8 barely misses the fuse because of the larger hole. The 5/16 hits the fuse.

Anyone know of a 4/0 lug that fits?
View attachment 96365View attachment 96366View attachment 96367View attachment 96368

What did you end up doing to solve this issue?