diy solar

diy solar

M6 Bus Bar Terminal Hole Size.

A.Justice

Swears he didn't start that fire.
Joined
Sep 12, 2020
Messages
1,561
Location
TN
I just got the 25ah TopBand cells from BH, and am going to make some bus bars. The stud is M6.

Should I drill 6mm holes or 6.5mm? I don't have good metric bits, so I want to buy the right size, the first time, on Amazon.

Thanks in advance!
 
I recently used a 6mm bit and the 6mm screws go through but they are tight. For a bus 6.5mm might be better. You can always go larger if needed to readjust.
 
Back
Top