mickwheelz
New Member
- Joined
- Oct 12, 2021
- Messages
- 1
I recently started building a little solar setup in my lockup, and happened to come across this forum when looking at ways to collect data from the Renogy Wanderer controller I bought. My plan was to get the data in to my home automation system (Home Assistant).
I found quite a lot of useful information here and decided to build my own data collection utility, it takes the data from the controller and publishes it to a MQTT bus that Home Assistant (or anything else that can use MQTT.. e.g Grafana) can use.
It's open source and available on GitHub here: https://github.com/mickwheelz/NodeRenogy
It's currently running on a Raspberry Pi Zero that is connected to my controller and seems to be working quite well.
I'd love to get some feedback and see what people think!
I found quite a lot of useful information here and decided to build my own data collection utility, it takes the data from the controller and publishes it to a MQTT bus that Home Assistant (or anything else that can use MQTT.. e.g Grafana) can use.
It's open source and available on GitHub here: https://github.com/mickwheelz/NodeRenogy
It's currently running on a Raspberry Pi Zero that is connected to my controller and seems to be working quite well.
I'd love to get some feedback and see what people think!