diy solar

diy solar

MPP LV6548 Build

Nope. Mine worked once i figured out the wifi password. It could be a security setting on the router though. Is your DNS set to the right IP on your LAN? Its usually either provided by your internet provider, or set to the router IP address so it can provide it, like 192.168.0.1.
MAke sure the default gateway for DHCP on the inverter is set to your routers IP address. It may be a 10 class address also like 10.0.0.1
Open a CMD prompt on your laptop (assuming windows) and type ipconfig /all. That should tell you if DHCP is enabled and the address of your gateway and DHCP / DNS servers (usually the router IP is the default).
 
Back
Top