Batonage
New Member
- Joined
- Jan 5, 2020
- Messages
- 27
Hi All,
I've finally gotten around to installing my MPPSolar PIP 5048GK, and have encountered a problem...
First up, system set up...
Inverter as above, https://mppsolar.com.au/product/pip-5048gk-5kw-48vdc-solar-inverter/
battery Pylontech US3000 (3.2kW) LiFePO4 https://aasolar.co.nz/product/pylontech-us3000-lithium-battery/
PV array, 6 x 410W (410W Mono PERC Half Cell Silver Solar Panel, Voc 50.12V, https://aasolar.co.nz/product/410w-mono-perc-half-cell-silver/)
Before I had the array fully wired I thought to try the inverter with the battery only. It was showing SOC as 3 lights of 6. I connected the battery (but not the PV), and turned on the battery and then the inverter. The inverter started up and within 30 seconds shut down. I was checking something else at the time and so didn't see any error codes prior to shut down.
Now the PV array is set up I can't get the inverter to start at all. I have read that low battery voltage can cause a shut down, but it should start with PV supply. Any help?
I have checked the internal fuse and seems ok. I am away from site ATM, but will check battery voltage today.
cheers
Andi
I've finally gotten around to installing my MPPSolar PIP 5048GK, and have encountered a problem...
First up, system set up...
Inverter as above, https://mppsolar.com.au/product/pip-5048gk-5kw-48vdc-solar-inverter/
battery Pylontech US3000 (3.2kW) LiFePO4 https://aasolar.co.nz/product/pylontech-us3000-lithium-battery/
PV array, 6 x 410W (410W Mono PERC Half Cell Silver Solar Panel, Voc 50.12V, https://aasolar.co.nz/product/410w-mono-perc-half-cell-silver/)
Before I had the array fully wired I thought to try the inverter with the battery only. It was showing SOC as 3 lights of 6. I connected the battery (but not the PV), and turned on the battery and then the inverter. The inverter started up and within 30 seconds shut down. I was checking something else at the time and so didn't see any error codes prior to shut down.
Now the PV array is set up I can't get the inverter to start at all. I have read that low battery voltage can cause a shut down, but it should start with PV supply. Any help?
I have checked the internal fuse and seems ok. I am away from site ATM, but will check battery voltage today.
cheers
Andi