TheSmartGerman
New Member
- Joined
- Feb 10, 2021
- Messages
- 45
Hello,
I may have a problem with my MPPSolar 5084MGX inverter: My transfer Time is way to long!
Is there any setting beside Step 03 - AC input voltage range ?
According to the manual it should by:
Transfer Time:
10ms typical (UPS)
20ms typical (Appliances)
If I simulate a load with 1kW (heatgun) and disconnect the battery and no solar power only untilty.
The inverter will need at least 1-2 Seconds to switch to bypass.
Is there any mistake in my thinking / testing?
THX
I may have a problem with my MPPSolar 5084MGX inverter: My transfer Time is way to long!
Is there any setting beside Step 03 - AC input voltage range ?
According to the manual it should by:
Transfer Time:
10ms typical (UPS)
20ms typical (Appliances)
If I simulate a load with 1kW (heatgun) and disconnect the battery and no solar power only untilty.
The inverter will need at least 1-2 Seconds to switch to bypass.
Is there any mistake in my thinking / testing?
THX