I have a powmr 48v 3500 watt all in one hybrid inverter. The MPPT solar charger tends to get stuck at 60v if the solar array is connected to it when the sun comes up. Once the sun is up disconnecting and reconnecting the solar charger resets it and then the maximum power point will be discovered, Improving my solar input by as much as %50. For example if it’s charging at 1000 watts 60 volts and I turn off the solar array and turn it back on in a few minutes it will produce over 1400 watts at nearly 90 volts. Is this a glitch in the controller? Or do I have something setup incorrectly?